Wiring An Outlet Black To Brass. Black goes on brass terminals, white goes. Do this for the white and green or bare wires.
Image from publicism.info
Just keep in mind the basic electrical color code: Black goes on brass terminals, white goes. The white wire, to a silver terminal.
Web The Terminals Are Clearly Marked, And The Load Terminals Are Usually Covered With Tape When You Unpack The Outlet.
Web the black wire attaches to a brass terminal; Web the black power wire attaches to the brass (or gold) side screw terminal the white neutral wire attaches to the silver side screw terminal the bare or green ground wire. Web 1 with all the thrash on this question the true answer is it depends on the application.
Black Goes On Brass Terminals, White Goes.
Connect the white wire to the silver screw, the black wire to the gold screw, and the copper wire to the. Web for instance, connect three black wires to a wire nut and then run one of them to the brass screw. A 3 way switch has a black screw for the hot this is common to the travelers so in this case.
Just Keep In Mind The Basic Electrical Color Code:
Connecting multiple wires to the. The black circuit wire goes on the brass. Hold the outlet up to the electrical box and connect the.
Web Remember To Follow Typical Receptacle Wiring Techniques:
The white wire, to a silver terminal. Disconnect the power supply to the outlet by turning off the breaker inside the panel, check to make sure the power supply has been disconnected, plug something. Do this for the white and green or bare wires.
Web The Black Wire Is The Hot Wire, The White Wire Is The Neutral Wire, And The Bare Wire Is The Ground Wire.
